John, " ...so I guess you meant to ask a different question" Well, no (I am interested in what the acronyms might mean) and yes (given my wording was not effective).
I want to more clearly understand what the use limits are for the various types. I have a suspicion they are intended to connect to terminal on certain device types or are intended for use in certain voltage or current regimes. Particularly, the company rejects the use of "PG-Type" ring-lugs (with insulation apparently intended to cover the conductor crimp part and then also crimp over the insulation part of the wire separately), but prefers the use of "R-Type" and "CB-Type" ring-lugs which are both un-insulated. Their spec in general is ambiguous and I am hoping that understanding the codes might bring more insight into their underlying concerns. >From responses so far it looks like these must be custom internal codes rather >than common designations. Regards, Lauren Crane KLA-Tencor -----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: Tuesday, December 10, 2013 2:32 AM To: [email protected] Subject: Re: [PSES] Wire lug nomenclature meaning? In message <3b7899306eab4de3946ef526fd0c7...@blupr03mb119.namprd03.prod.outlook.com> , dated Mon, 9 Dec 2013, "Crane, Lauren" <[email protected]> writes: >Does anyone know where these type-designators come from and what they >mean Probably from a manufacturer's catalogue. 'What they mean' is surely given by the descriptions, so I guess you meant to ask a different question. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk Nondum ex silvis sumus John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
