In message
<924fdc0caa9e4252884684bdec5ee...@blupr02mb116.namprd02.prod.outlook.com>
, dated Tue, 10 Dec 2013, Brian Oconnell <[email protected]>
writes:
Do not know about these specific types, but IEC61238 would have the
'correct' designations.
This standard is for large lugs: the Scope clause says:
.... conductors complying with IEC 60228 and IEC 60228A with
cross-sectional areas 10 mm2 and greater for copper and 16 mm2 and
greater for aluminium
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
Nondum ex silvis sumus
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
