There are usually 'conditioned' cycles, typically just 10 to 100, for various 
environmental tests and under load conditions in UL817 and/or UL489 and 
UL60320-1; and several other that cannot be remembered for hot-swap and PV 
installs. In my favorite compliance reference, Alice's Adventures in 
Wonderland, multiple insertion/extraction cycles are indicated.

Brian

From: Ed Price [mailto:[email protected]] 
Sent: Tuesday, May 27, 2014 5:17 PM
To: [email protected]
Subject: Re: [PSES] "exercising" connections for health?

Without sending anyone off on a long search, does anyone have an idea about the 
number of mating cycles that the common consumer AC power connectors (like the 
USA NEMA-15 and Euro equivalents) are rated for?

Ed Price
WB6WSN
Chula Vista, CA USA

-----Original Message-----
From: John Woodgate [mailto:[email protected]] 
Sent: Tuesday, May 27, 2014 9:59 AM
To: [email protected]
Subject: Re: [PSES] "exercising" connections for health?

In message 
<ff616e8a3fc0497bab5fcbb17aaa6...@blupr02mb116.namprd02.prod.outlook.com>
, dated Tue, 27 May 2014, Brian Oconnell <[email protected]> 
writes:

>
>The immoral of these stories is that a connector, unless specifically 
>rated for a certain insertion duty cycle, should not be subject to 
>multiple re-insertion cycles. Components intended to interrupt load 
>current and/or are rated for multiple insertion cycles should be ok and 
>will serve the Empire well if used per the mfr's conditions of 
>acceptability.

This is true, but for some widely-used connectors the manufacturers 
either don't give a clear specification or, for insertions, quote an 
incredibly low figure, which, if respected, would cause the connector to 
be rejected.
-- 
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
Nondum ex silvis sumus
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<[email protected]>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher:  <[email protected]>
David Heald: <[email protected]>

Reply via email to