I come up against this problem all the time. Some of our customers are aware of what the product family standard says regarding the basic standards. It would be useful if all the product family standards used the identical dated references of the basic standards but I guess that it's too much to hope for.
Regards, David Shidlowsky | Technical Writer Address 1 Bat-Sheva St. POB 87, LOD 71100 Israel Tel 972-8-9186113 Fax 972-8-9153101 Mail [email protected]/[email protected] Web www.itl.co.il Fill out Customer Satisfaction Survey Global Certifications You Can Trust -----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: Tuesday, September 09, 2014 12:06 AM To: [email protected] Subject: Re: [PSES] More Tangled.... RE: [PSES] Are unlisted EN standards that are undated references immediately effective? In message <a79213fd871f4f47900f8ffaa5b5c...@blupr03mb119.namprd03.prod.outlook.com> , dated Mon, 8 Sep 2014, "Crane, Lauren" <[email protected]> writes: >I guess the sensible approach is to consider the CENLEC's dop to dow >dates as a defacto transition period. They are as far as CENELEC is concerned, but they are not established legally, as CENELEC cannot do that. Normally, the Commission adopts the same dates, but not always. The legal equivalent of the dow is the docopocoss, of course. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk Quid faciamus nisi sit? John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
