Scott,
There has been quite a bit of discussion here on US
requirements. As you can tell there is no ‘overall’ single US requirement that
covers everything. The final say is locally for most instances; the local AHJ
inspectors have local control. Local inspectors have access to all
construction – both new construction and substantial remodeling – and must
approve the final construction, including the electrical installation. They
can refuse to accept any unit for attachment to the grid power based upon their
local laws, rules and understanding, s we have commented previously. There are
more than 10k jurisdictions in the USA. This is confusing to outsiders who are
looking for a simple solution such as the EU has developed.
Since you have asked; the best response of manufacturers is to
provide NRTL certification for their product when it is sold in the USA.
This is additional effort and, possibly, additional cost since
there is a finite list of NRTL labs. Since most NRTLs will also issue a CB
Report where the requirements are harmonized, I have advised manufacturers to
obtain both evaluations and reports at the same time for a savings in effort
and cost.
:>) br, Pete
Peter E Perkins, PE
Principal Product Safety & Regulatory Affairs Consultant
PO Box 23427
Tigard, ORe 97281-3427
503/452-1201
<mailto:[email protected]> [email protected]
From: Scott Xe [mailto:[email protected]]
Sent: Saturday, July 23, 2016 10:31 PM
To: [email protected]
Subject: Re: [PSES] Safety requirements in US
Thanks for all your responses!
What is the best practice for the suppliers/importers to demonstrate the
compliance with relevant requirements?
Scott
From: Ron Wellman <[email protected] <mailto:[email protected]> >
Reply-To: Ron Wellman <[email protected] <mailto:[email protected]> >
Date: Sunday, 24 July 2016 at 12:14 AM
To: <[email protected] <mailto:[email protected]> >
Subject: Re: [PSES] Safety requirements in US
United States laws are codified in the United States Code (USC). The Code of
Federal Regulations (CFR) is the implementation of the laws in the USC.
Ron
From: Doug Powell [mailto:[email protected]]
Sent: Saturday, July 23, 2016 7:38 AM
To: [email protected] <mailto:[email protected]>
Subject: Re: [PSES] Safety requirements in US
Actually, I think FDA, FCC, FTA, USDA, CDC, Homeland Security, etc. all report
up to the CFR.
Doug
From: Nyffenegger, Dave
Sent: Saturday, July 23, 2016 8:32 AM
To: Doug Powell; [email protected] <mailto:[email protected]>
Subject: RE: [PSES] Safety requirements in US
Anything with a laser in it is also governed by FDA regs. I think the
objective is to make it so confusing that no-one can figure it out completely
and the lawyers will always have something to do.
-Dave
From: Doug Powell [mailto:[email protected]]
Sent: Saturday, July 23, 2016 10:08 AM
To: [email protected] <mailto:[email protected]>
Subject: Re: [PSES] Safety requirements in US
Ultimately, everything goes up to the Code of Federal Regulations, CFR. These
are the law of the land. You can find the regulations that both OSHA and CPSC
follow there. In turn, each state has their own set of laws, for example in my
home state are the Colorado Revised Statutes, CRS.
Usually all these can be found online at no charge.
All the best, Doug
From: Kevin Robinson
Sent: Saturday, July 23, 2016 2:47 AM
To: [email protected] <mailto:[email protected]>
Reply To: Kevin Robinson
Subject: Re: [PSES] Safety requirements in US
Scott,
In the US, the regulations rounds on the type of product and where it will be
used. For example:
If the product will be used in the workplace then Osha NRTL regs apply.
If the product will be used in the home or around schools, then CPSC regs
apply.
If the product is a medical device then FDA regs apply
Most products fall under multiple regulators as for example, a hospital is both
a medical space as well as a workplace. Thankfully, most us regulations
reference voluntary consensus standards so one round of testing will often
satisfy all safety regulators.
Kevin Robinson
Get Outlook for iOS <https://aka.ms/o0ukef>
_____________________________
From: Scott Xe <[email protected] <mailto:[email protected]> >
Sent: Saturday, July 23, 2016 1:30 AM
Subject: [PSES] Safety requirements in US
To: <[email protected] <mailto:[email protected]> >
Within EU, most of electrical products are covered by LVD and GPSD. In US,
which body, law and standards are responsible for the similar regulatory?
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected] <mailto:[email protected]> >
All emc-pstc postings are archived and searchable on the web
at:http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected] <mailto:[email protected]> >
Mike Cantwell <[email protected] <mailto:[email protected]> >
For policy questions, send mail to:
Jim Bacher <[email protected] <mailto:[email protected]> >
David Heald <[email protected] <mailto:[email protected]> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected] <mailto:[email protected]> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected] <mailto:[email protected]> >
Mike Cantwell <[email protected] <mailto:[email protected]> >
For policy questions, send mail to:
Jim Bacher <[email protected] <mailto:[email protected]> >
David Heald <[email protected] <mailto:[email protected]> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected] <mailto:[email protected]> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected] <mailto:[email protected]> >
Mike Cantwell <[email protected] <mailto:[email protected]> >
For policy questions, send mail to:
Jim Bacher <[email protected] <mailto:[email protected]> >
David Heald <[email protected] <mailto:[email protected]> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected] <mailto:[email protected]> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected] <mailto:[email protected]> >
Mike Cantwell <[email protected] <mailto:[email protected]> >
For policy questions, send mail to:
Jim Bacher <[email protected] <mailto:[email protected]> >
David Heald <[email protected] <mailto:[email protected]> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected] <mailto:[email protected]> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected] <mailto:[email protected]> >
Mike Cantwell <[email protected] <mailto:[email protected]> >
For policy questions, send mail to:
Jim Bacher <[email protected] <mailto:[email protected]> >
David Heald <[email protected] <mailto:[email protected]> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected] <mailto:[email protected]> >
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
<http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected] <mailto:[email protected]> >
Mike Cantwell <[email protected] <mailto:[email protected]> >
For policy questions, send mail to:
Jim Bacher <[email protected] <mailto:[email protected]> >
David Heald <[email protected] <mailto:[email protected]> >
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
