For Europe, 'industry' means heavy industry - large machines, high-power electrical installation, not powered from the public low-voltage supply. No broadcast radio or TV receivers likely to be within 30 metres. With best wishes DESIGN IT IN! OOO - Own Opinions Only <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England Sylvae in aeternum manent. From: Kortas, Jamison [mailto:[email protected]] Sent: Tuesday, October 18, 2016 1:45 PM To: [email protected] Subject: [PSES] Criteria for determining industrial vs. non-industrial for EMC testing purposes Good Morning, What do you use for criteria when reviewing the intended environment in which a device will be placed to determine if it is industrial or non-industrial? I have seen and read varying opinions on what criteria to use. It ranges from a transformer isolated factory to the nature of the other products in the immediate vicinity (a mechanical room in a grocery store = industrial due to the equipment in its immediate environment). I am familiar with some of the definitions in places, but am not so sure that those are what are typically followed in practice. I appreciate any thoughts. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> >
- ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
