Thanks for your sharing experience! Did you conduct the flash test that normally is over 1,250 Vac by that time? Probably a megger tester is more portable for onsite testing than flash test as an alternative.
Scott From: <[email protected]> Date: Monday, 19 February 2018 at 2:50 PM To: 'Scott Xe' <[email protected]>, <[email protected]> Subject: RE: [PSES] Insulation resistance test I don’t know about history, but I remember testing the insulation resistance of every wire in Lower Granite Lock and Dam on the Snake River the summer of 1974. 1000 VDC. The specification called for 1 MOhm and we typically saw infinity. The whole summer we found 1 bad wire. Ghery S. Pettit From: Scott Xe [mailto:[email protected]] Sent: Sunday, February 18, 2018 9:46 PM To: [email protected] Subject: [PSES] Insulation resistance test Insulation resistance test is one of most common safety tests nowadays: Flash test, earth continuity test, leakage current test and insulation resistance test. Can someone share the history of this teat to use DC and 500 V. The products are working on AC and test voltage is higher than normal operating voltage but much lower than the flash test. It is a trend to skip this test on production line. What are the distinct benefits for this test? Thanks and regards, Scott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
