Hi David, I don't know if this is what you are looking for, but you could check out ISO/IEC 23894 <https://www.iso.org/standard/77304.html>.
On Fri, Jun 9, 2023 at 12:15 PM Douglas Powell <[email protected]> wrote: > Aside from all the news articles about problems with ChatGPT, I've tried a > few things myself. For example, "*write a complete test protocol for IEC > 62368-1 for a desktop audio streaming amplifier weighing less than 7 kg.* > " > > Of course, gave me a fairtly detailed but generally incomplete responses > under these topic headings. > > 1. Objective: > 2. Test Equipment: > 3. Test Setup: > 4. Test Procedures: > 4.1.2. Lifting Test: > 4.2.1. Ground Continuity Test: > 4.2.2. Insulation Resistance Test: > 4.2.3. Dielectric Voltage-Withstand Test: > 4.3.1. Audio Performance Test: > 4.3.2. Power Consumption Test: > 4.4. Environmental Tests (if applicable): > 5. Test Criteria: > 6. ... *after this point it was left blank ...* > > > In fun example is the 4.1.2 Lifting Test, it specified: "Apply a force of > 200 N in the upward direction" > > -Doug > > > Douglas E Powell > Laporte, Colorado USA > LinkedIn <https://www.linkedin.com/in/coloradocomplianceguy/> > > (UTC -06:00, US-MDT) > > > On Fri, Jun 9, 2023 at 11:49 AM Chuck August-McDowell < > [email protected]> wrote: > >> Friday’s attempt at humor… >> >> So how about using the text generator ChatGPT to write the standard draft? >> >> >> >> >> >> Chuck in Berkeley >> >> >> >> *From:* Vincent Lee <[email protected]> >> *Sent:* Thursday, June 8, 2023 7:05 PM >> *To:* [email protected] >> *Subject:* Re: [PSES] Looking for AI or machine vision related ISO >> standards for safety >> >> >> >> [THIS EMAIL IS FROM AN EXTERNAL SENDER] >> >> Huff, >> >> >> >> No national nor international is available yet. >> >> >> >> AI is more closely related to computer science than product safety. >> >> And who knows AI may experience another winter, since there were AI >> winter in 1980s - 1990s. >> >> >> >> Regards, Vincent >> >> >> >> >> >> On Wednesday, June 7, 2023 at 10:37:35 PM GMT+8, David Huff < >> [email protected]> wrote: >> >> >> >> >> >> All, >> >> I am working to guide a design that uses Artificial Intelligence and >> machine vision thru a certification type process (CE Mark) and I am looking >> for ISO or IEC standards or similar related guidance. My theory is that >> this is such new territory very little guidance exists yet. Are there any >> recommendations for international guidance. >> >> >> >> Thanks, >> >> David >> >> >> >> - >> ---------------------------------------------------------------- >> >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to < >> [email protected]> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://www.ieee-pses.org/list.html (including how to >> unsubscribe) <http://www.ieee-pses.org/list.html> >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> Mike Cantwell <[email protected]> >> >> For policy questions, send mail to: >> Jim Bacher <[email protected]> >> David Heald <[email protected]> >> ------------------------------ >> >> To unsubscribe from the EMC-PSTC list, click the following link: >> https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 >> >> - >> ---------------------------------------------------------------- >> >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to < >> [email protected]> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://www.ieee-pses.org/list.html (including how to >> unsubscribe) <http://www.ieee-pses.org/list.html> >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> Mike Cantwell <[email protected]> >> >> For policy questions, send mail to: >> Jim Bacher <[email protected]> >> David Heald <[email protected]> >> ------------------------------ >> >> To unsubscribe from the EMC-PSTC list, click the following link: >> https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 >> NOTICE: This email may contain confidential information. Please see >> https://meyersound.com/legal/#email-policy for our complete policy. >> - >> ---------------------------------------------------------------- >> >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to < >> [email protected]> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://www.ieee-pses.org/list.html (including how to >> unsubscribe) <http://www.ieee-pses.org/list.html> >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> Mike Cantwell <[email protected]> >> >> For policy questions, send mail to: >> Jim Bacher <[email protected]> >> David Heald <[email protected]> >> ------------------------------ >> >> To unsubscribe from the EMC-PSTC list, click the following link: >> https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 >> > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > [email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > ------------------------------ > > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > -- Scott Aldous | Regulatory Compliance Manager | [email protected] | 650-253-1994 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
