On Fri, 2007-12-07 at 14:15 -0800, Kirk Wallace wrote: > I would like to run AXIS remotely. I wrote some notes: > > http://www.wallacecompany.com/machine_shop/EMC2/remote_notes.html > > to help me keep things sorted out. I am going to give it a try, but if > anyone has comments or corrections, please let me know. Thanks.
I got the .ini and .nml files sorted out and was able to get tkemc working. Both the server and client screens match when selections are made on either computer. If I try to run AXIS, both screens come up, but E-stop and On buttons don't have any effect. Is AXIS known to work with a remote GUI? Are there any known issues with running AXIS on a remote GUI setup? -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending) ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
