Interesting if you have the time.. But for six bucks and free shipping... http://www.dealextreme.com/details.dx/sku.6040
----- Original Message ----- From: "Kirk Wallace" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Saturday, February 02, 2008 11:26 PM Subject: [Emc-users] Modbus RS-485 Transceiver > Chris Morley, > > I have been pretty slow with work on Modbus. I just read your wiki post > and you indicated that you needed an RS-485 adapter. I found one here: > > http://pinouts.ru/SerialPortsCables/rs485_cable_pinout.shtml > > I plan on building a couple for my SJ200 application, and if you want I > can make an extra and send it over. I'm not sure when I'll have time to > build and test it -- probably in the next couple of weeks. Let me know. > > -- > Kirk Wallace (California, USA > http://www.wallacecompany.com/machine_shop/ > Hardinge HNC lathe, > Bridgeport mill conversion, doing XY now, > Zubal lathe conversion pending) > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
