Chris, For your info. I downloaded the archive and it seemd to compile without problem (on my laptop with opensuse 10.3):
1004 tar xzf libmodbus-1.2.2.tar.gz 1005 cd libmodbus-1.2.2 1006 ./configure 1007 make Geert Chris Morley wrote: > Kirk > I thank you for the offer for the r485 converter. I think after reading some > of the posts I would rather go with full duplex. Paying you for, and > shipping, it would have been a pain too I think, as I am in Canada. > I came across a web site with a Modbus library that is GPL. > http://copyleft.free.fr/wordpress/index.php/libmodbus/ > In his trunk version he is working on a slave protocol - if I could get this > working I could set up two computers with rs 232 and test. prob test > classicladder too. > The big but is that I cannot figure out how to auto make the program . I > downloaded automake and autoconfig but it doesn't work and I don't know how > to trouble shoot the process. Any help would be great from anyone. > Just thought it might be interesting to peruse or even use for your work. > Thanks again. > > Chris Morley > > ---------------------------------------- >> From: [EMAIL PROTECTED] >> To: emc-users@lists.sourceforge.net >> Date: Sat, 2 Feb 2008 20:26:31 -0800 >> Subject: [Emc-users] Modbus RS-485 Transceiver >> >> Chris Morley, >> >> I have been pretty slow with work on Modbus. I just read your wiki post >> and you indicated that you needed an RS-485 adapter. I found one here: >> >> http://pinouts.ru/SerialPortsCables/rs485_cable_pinout.shtml >> >> I plan on building a couple for my SJ200 application, and if you want I >> can make an extra and send it over. I'm not sure when I'll have time to >> build and test it -- probably in the next couple of weeks. Let me know. >> >> -- >> Kirk Wallace (California, USA >> http://www.wallacecompany.com/machine_shop/ >> Hardinge HNC lathe, >> Bridgeport mill conversion, doing XY now, >> Zubal lathe conversion pending) >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2008. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > _________________________________________________________________ > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
