I have a ten-turn eight Watt Spectrol/Vishay potentiometer. http://www.vishay.com/doc?57093
I was having trouble getting sensible voltage readings through it, so I took it apart. It looks like it may not be made to be taken apart. The solder posts are mounted with a screws. The end of the screws have a short less than hair thin wire on it. I suppose I broke the wire when I loosened the screw? Has any one worked on these and have advise on how to repair them. Newark has them for $80 each so I'd like to fix the one I broke. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
