possible to replace it with a transistor circuit?
On Sat, May 24, 2008 at 7:18 PM, Kirk Wallace <[EMAIL PROTECTED]>
wrote:
> I have a ten-turn eight Watt Spectrol/Vishay potentiometer.
>
> http://www.vishay.com/doc?57093
>
> I was having trouble getting sensible voltage readings through it, so I
> took it apart. It looks like it may not be made to be taken apart. The
> solder posts are mounted with a screws. The end of the screws have a
> short less than hair thin wire on it. I suppose I broke the wire when I
> loosened the screw? Has any one worked on these and have advise on how
> to repair them. Newark has them for $80 each so I'd like to fix the one
> I broke.
>
> --
> Kirk Wallace (California, USA
> http://www.wallacecompany.com/machine_shop/
> Hardinge HNC/EMC CNC lathe,
> Bridgeport mill conversion, doing XY now,
> Zubal lathe conversion pending
> Craftsman AA 109 restoration
> Shizuoka ST-N/EMC CNC)
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
