link to power supplies on this page http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Suppliers
but it might be out of your price range... John On 2 Jun 2008 at 14:08, [EMAIL PROTECTED] wrote: > Hi > I have one AC servo motor IG 34 with power brake. To open that power > brake I need 24V 1.5 amp constant power. I searched and found that in > the same city where I am there are mfg. http://www.v-infinity.com/ > There have very good price! AC-DC converter 2-24 cost $43, but I want > to buy power supply that has multiply power DC output to I can > supply my limits and home switches. I my use it for other I/O needs. > So, I need help with what voltage MAX and MIN should be to be safe > with MESA Electronic boards 7i33 / 7i37? After I find it I will buy > one power supply that has multiply out puts such as 24V 2A for power > brake and 12V 2 A (or something more appropriate for I/O needs) > > So what voltage is safe or appropriate for I/O needs? > Thanks > Aram > > > > ---------------------------------------------------------------------- > --- This SF.net email is sponsored by: Microsoft Defy all challenges. > Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
