On Wed, Jul 02, 2008 at 02:12:17PM -0700, Kirk Wallace wrote: > I did my first rigid tap on my lathe. It worked well the first time. > (Thank you, developers) There is one minor problem. There seems to be a > burr left behind about 1.3mm (.050") into the 4-40UNC hole. I shifted Z > in my g-code to see if it would move , and it didn't, so I think it is > independent of EMC2. I have to run a tap through by hand to clear it, so > I suppose if I run g33.1 twice, that should fix it. I would rather not > do that, so has anyone had this problem and fixed it? Thanks.
What kind of tap are you using? Can you take a picture of the problem? By shifting Z do you mean you tried starting the G33.1 higher 'above' the hole? ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
