On Wed, 2008-07-02 at 15:55 -0700, Kirk Wallace wrote: ... snip > I ended up clearing the threads by hand while the next part runs. If I > can figure it out, I should have a youtube of the part being made soon.
Videos here: http://www.wallacecompany.com/machine_shop/HNC/Rigid_Tapping_3.html http://www.wallacecompany.com/machine_shop/HNC/Rigid_Tapping_1.html http://www.wallacecompany.com/machine_shop/HNC/Rigid_Tapping_2.html The original files are better quality. If anyone has tips on getting better quality from .mov files on youtube, please let me know. Thanks -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
