IMO this sounds like a case of creating one configuration but running another. Make certain that the config picker is pointed to the config that you just made. I tend to do this by choosing a really strange or specific config name like "mylittlestepperscara" or some such.
HTH Rayh On Sat, 2008-07-12 at 07:05 -0600, John Thornton wrote: > A bit more information is needed to help you. > > Try and be as specific as possible when describing a problem. > List each step you took to arrive at your problem. > > SWAG, sounds like your test program and the Stepconf config are not the > same... > > John > > On 11 Jul 2008 at 10:08, Cindee Lichter wrote: > > > I am very new to this so please bare with me. I did a lot of checking > > with LEDs on the parallel port before I actually moved on to a > > stepping motor driver. But when I did it all worked and the motor > > moved as the program I had installed to test it tld it to. I could > > tell needed to config it btter so I went through that program. I used > > the test this axis button and got it where it was working really well. > > so I applyed it. When I went back to my test program nothing happens. > > I went back to the config program and again it works fine. (and my > > changes were there). What am I missing? > > > > John > > > > > > > > > > ---------------------------------------------------------------------- > > --- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! > > Studies have shown that voting for your favorite open source project, > > along with a healthy diet, reduces your potential for chronic lameness > > and boredom. Vote Now at http://www.sourceforge.net/community/cca08 > > _______________________________________________ Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > ------------------------------------------------------------------------- > Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! > Studies have shown that voting for your favorite open source project, > along with a healthy diet, reduces your potential for chronic lameness > and boredom. Vote Now at http://www.sourceforge.net/community/cca08 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
