I agree. I've tried so many different times that I have a big list that doesn't
make any sence so now I'm loading ubuntu for the 4th time. I sure wish what I
see in the book and what I see on he screen looked the same.
John
--- On Sat, 7/12/08, Ray Henry <[EMAIL PROTECTED]> wrote:
> From: Ray Henry <[EMAIL PROTECTED]>
> Subject: Re: [Emc-users] stepper config
> To: "Enhanced Machine Controller (EMC)" <[email protected]>
> Date: Saturday, July 12, 2008, 7:19 AM
> IMO this sounds like a case of creating one configuration
> but running
> another. Make certain that the config picker is pointed to
> the config
> that you just made. I tend to do this by choosing a really
> strange or
> specific config name like "mylittlestepperscara"
> or some such.
>
> HTH
>
> Rayh
>
>
> On Sat, 2008-07-12 at 07:05 -0600, John Thornton wrote:
> > A bit more information is needed to help you.
> >
> > Try and be as specific as possible when describing a
> problem.
> > List each step you took to arrive at your problem.
> >
> > SWAG, sounds like your test program and the Stepconf
> config are not the same...
> >
> > John
> >
> > On 11 Jul 2008 at 10:08, Cindee Lichter wrote:
> >
> > > I am very new to this so please bare with me. I
> did a lot of checking
> > > with LEDs on the parallel port before I actually
> moved on to a
> > > stepping motor driver. But when I did it all
> worked and the motor
> > > moved as the program I had installed to test it
> tld it to. I could
> > > tell needed to config it btter so I went through
> that program. I used
> > > the test this axis button and got it where it was
> working really well.
> > > so I applyed it. When I went back to my test
> program nothing happens.
> > > I went back to the config program and again it
> works fine. (and my
> > > changes were there). What am I missing?
> > >
> > > John
> > >
> > >
> > >
> > >
> > >
> ----------------------------------------------------------------------
> > > --- Sponsored by: SourceForge.net Community
> Choice Awards: VOTE NOW!
> > > Studies have shown that voting for your favorite
> open source project,
> > > along with a healthy diet, reduces your potential
> for chronic lameness
> > > and boredom. Vote Now at
> http://www.sourceforge.net/community/cca08
> > > _______________________________________________
> Emc-users mailing list
> > > [email protected]
> > >
> https://lists.sourceforge.net/lists/listinfo/emc-users
> > >
> >
> >
> >
> >
> -------------------------------------------------------------------------
> > Sponsored by: SourceForge.net Community Choice Awards:
> VOTE NOW!
> > Studies have shown that voting for your favorite open
> source project,
> > along with a healthy diet, reduces your potential for
> chronic lameness
> > and boredom. Vote Now at
> http://www.sourceforge.net/community/cca08
> > _______________________________________________
> > Emc-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
> -------------------------------------------------------------------------
> Sponsored by: SourceForge.net Community Choice Awards: VOTE
> NOW!
> Studies have shown that voting for your favorite open
> source project,
> along with a healthy diet, reduces your potential for
> chronic lameness
> and boredom. Vote Now at
> http://www.sourceforge.net/community/cca08
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
