The HobbyCNC boards all have seperate micro step settings for each axis. The J1-3 jumpers are set certain ways - for full stepping its J1 on J2 on J3 off if I recall correctly. THere is a J4 setting which deals with the powerdown function of the chip which I modified to allow EMC to manage.
The maker of the board does not readily publish sheets on his board. I had lost my instructions and he readily forwarded the datasheets after an email request. I also noticed that the pinouts follow the Xylotex standard. Guess I could have saved my self some trouble selecting that on the wizard. Brian ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
