Thanks Jeff, This is it, it works now!
Adam 2008/11/11 Jeff Epler <[EMAIL PROTECTED]> > On the parport there is an 'in-not' pin for every 'in' pin. > http://www.linuxcnc.org/docview/html//hal_drivers.html#r1_1_2 > it sounds like you should use in-not in your case: > net home+limitX parport.0.pin-11-in-not => axis.0.neg-lim-sw-in > > Jeff > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge > Build the coolest Linux based applications with Moblin SDK & win great > prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
