Chris Morley wrote:
> 
>>> Head weight is the preload?  Not always realistic when pushing on a drill 
>>> bit 
>>> to bore a hole.  The hole won't be quite as deep as you told emc to do in 
>>> that case.
>> Sorry, I don't know what "head weight is the preload" means. I'm still 
>> very new to this and I'm sure I'm doing a million things wrong.
>>
>> Andy
>>
> 
> He means you are using the weight of the head to stay on one
> side of the backlash. But if you machine down That may overcome
> the weight of the head and then you are not exactly where EMC
> thinks you are.

OK, thanks. Makes sense. I don't think the weight of my z-axis is enough 
to not require backlash compensation because it definitely made an 
improvement to what I was measuring with a dial indicator.

Andy

-- 
Andy
PGP Key ID: 0xDC1B5864

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to