Thanks Michael, I also did the sudo apt-get build-essentials as per Jeff Epler from IRC.
In addition, someone on IRC (cannot recall who it was atm) noted how to change the HAL files. I added those notes to the wiki page for future reference. I am going to try to both correct the skew and try out the compensation later today. Many thanks for the Module. On Sun, Feb 1, 2009 at 5:12 AM, Michał Geszkiewicz <[email protected]> wrote: > On Sun, 01 Feb 2009 00:54:08 +0100, BRIAN GLACKIN > <[email protected]> wrote: > > > The description for doing the compile on the page is nice. It would be > > usefull to have a link to the EMC-dev install wiki page - searching for > > that > > now. > > > > you open terminal and type: > sudo apt-get install emc2-dev > > and you have installed. thats all. > > then you have comp tool for installing kinematics available > > > regards, > Michael > > > > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
