My setup (hobby purposes) Ply/MDF Gantry Router (Lionclaw LC50A) with a working envelope of 48 X 24 X 4 (all in) used for wood/mdf projects.
Controller is a HobbyCNC 3AUPC Rev1 board (allegro chip). After cutting several parts, I noticed after a second relocation of the machine, the gantry is skewed slightly. Assuming the X axis is OK, my Y at X=0 is Position - Deviation 0 0 12 -3/16 24 -3/8 I plan on creating a grid with a nail point then measuring the entire working surface but for now - the numbers are approximate. I have searched the integrator's manual and cannot find a place to make corrections. Any direction is appreciated. Brian ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
