Thanks Chris, exactly on target, this one IS based on MOSCHIP MCS9805CV. Have to go find something else. In reference http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?PPMC_Board_Set I found these known good chips SMC37C665 (This is Multi I/O for MOBO IIRC) SMC37C666 SMC37C669 W83997TF SIIG PCI board
Are there any other known good chips that are common out there? Not so easy to find out in advance what chip might be on a particular board. // Lars -----Original Message----- From: Chris Radek [mailto:ch...@timeguy.com] Sent: den 13 april 2009 16:53 To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] probe_parport; what does it do? On Mon, Apr 13, 2009 at 03:31:18PM +0200, Lars Andersson wrote: > Trying to make my EPP communication work today, works OK on builtin 0x378 > but not on an EPP/ECP PCI card. If your card is NETMOS based, they are known not to work in EPP mode. http://thread.gmane.org/gmane.linux.distributions.emc.user/11010/focus=11233 ---------------------------------------------------------------------------- -- This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
