Hello all have been reading a lot from your emailing, I going to start a cnc router build 3 axis machine . Have lots of questions. Plan is to use dc motors ¾ hp 1725 rpm motor with fincor 2250 dc controller. These were found at scrap yard all work ok. Controller is using a 5k pot to control speed. Will use a 1024 quadature encoder on the dc motor fan shaft. Would like to concentrate on getting electronics up first 1. What board is easiest to configure fort this. I am leaning toward a Pluto or a mesa 7i 33 2. Will this work using the board to control a 0-10 volt control to the 2250 on a pid loop it also has to have output for fwd rev and enable 3. Will I need any other hard ware for now I want to be as cheap as possible?
Thanks for any input in advance ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
