Kirk Wallace wrote: > [snip] > >I replaced the PC and ran an air part. I noticed that the screen blanked >near slot 19, but the I got the screen back with the mouse and the part >completed with out interruption. I disabled the screen saver and ran two >more air parts which completed properly. I set up the real part, and it >stopped at the same spot in slot 19 as before. I jogged out of the hole, >disabled radius compensation with g40, then did g28 and the spindle >headed back for the hole. I have no idea how to troubleshoot this. I >didn't see anything in dmesg. Anyone have any ideas? Oh this time I used >EMC2 2.3.1 on 8.04. Thanks. > > Can you try running it on a sim config? (I don't recall if you've tried that yet)
- Steve ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
