Kirk Wallace wrote: > I replaced the PC and ran an air part. I noticed that the screen blanked > near slot 19, but the I got the screen back with the mouse and the part > completed with out interruption. I disabled the screen saver and ran two > more air parts which completed properly. I set up the real part, and it > stopped at the same spot in slot 19 as before. I jogged out of the hole, > disabled radius compensation with g40, then did g28 and the spindle > headed back for the hole. I have no idea how to troubleshoot this. I > didn't see anything in dmesg. Anyone have any ideas? Oh this time I used > EMC2 2.3.1 on 8.04. Thanks. > It sounds like you need to determine what the difference is between cutting air and cutting metal. Is it the Z coordinates? Is it because the spindle drive is on?
You may have to send the program to one of the developers for a trial run. Jon ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
