Stuart, I missed some of the chat on this but in your image you need to connect C and E together or the timer will not work.
http://www.linuxcnc.org/docview/html//ladder_classic_ladder.html#r1_7_3 John On 29 Jun 2009 at 14:56, Stuart Stevenson wrote: > I just got back and looked at the configs and wiki. I don't use > %W's. > The link did not help me. > I > > On Mon, Jun 29, 2009 at 11:39 AM, Chris Radek<[email protected]> > wrote: > > On Mon, Jun 29, 2009 at 10:19:18AM -0500, Stuart Stevenson > wrote: > >> Gentlemen, > >> Ubuntu 6.06 > >> EMC2-trunk (git pull this morning) > >> Cinci 5axis machine > >> the var %I7 shows on > >> the section dislay %I7 is not on and the lube timer does not > run > >> screen shot is here http://imagebin.org/53991 > > > > > > This must be an old ladder you've brought forward from 2.2. > The > > timer change, and other important things you should know, are on > the > > UPDATING page. > > > > > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?UPDATING#Classicladder_c > hanges > > > > > > > -------------------------------------------------------------------- > ---------- > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > -- > you can lead a person to knowledge > but you cannot make him think > > -------------------------------------------------------------------- > ---------- > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
