Stuart: If I understand the problem you can't edit the rung because you have to 'make active' the rung first (each rung is 6 lines wide). scroll the page till you see the rung you want to edit. You should see a colour change around the left and right sides (black to red). Red is the 'active' rung. It seems that while scrolling up vrs down the point that it switches is different. Anyways once you have the red border in the right rung. hit the edit button and modify. I'm sure you can get it from there.
Chris Morley > Date: Mon, 29 Jun 2009 16:17:03 -0500 > From: [email protected] > To: [email protected] > Subject: Re: [Emc-users] classicladder not functioning > > John, > The problem (at this time) is not the knowledge of the needed > change it is the how to do it. I do not know how to get the CL editor > to edit the rung the timer is in. The CL editor picks the other rung > to edit. > thanks > Stuart > > On Mon, Jun 29, 2009 at 5:10 PM, John Thornton<[email protected]> wrote: > > Stuart, > > > > I missed some of the chat on this but in your image you need to connect C > > and E together > > or the timer will not work. > > > > http://www.linuxcnc.org/docview/html//ladder_classic_ladder.html#r1_7_3 > > > > John > > > > On 29 Jun 2009 at 14:56, Stuart Stevenson wrote: > > > >> I just got back and looked at the configs and wiki. I don't use > >> %W's. > >> The link did not help me. > >> I > >> > >> On Mon, Jun 29, 2009 at 11:39 AM, Chris Radek<[email protected]> > >> wrote: > >> > On Mon, Jun 29, 2009 at 10:19:18AM -0500, Stuart Stevenson > >> wrote: > >> >> Gentlemen, > >> >> Ubuntu 6.06 > >> >> EMC2-trunk (git pull this morning) > >> >> Cinci 5axis machine > >> >> the var %I7 shows on > >> >> the section dislay %I7 is not on and the lube timer does not > >> run > >> >> screen shot is here http://imagebin.org/53991 > >> > > >> > > >> > This must be an old ladder you've brought forward from 2.2. > >> The > >> > timer change, and other important things you should know, are on > >> the > >> > UPDATING page. > >> > > >> > > >> http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?UPDATING#Classicladder_c > >> hanges > >> > > >> > > >> > > >> -------------------------------------------------------------------- > >> ---------- > >> > _______________________________________________ > >> > Emc-users mailing list > >> > [email protected] > >> > https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > >> > > >> > >> > >> > >> -- > >> you can lead a person to knowledge > >> but you cannot make him think > >> > >> -------------------------------------------------------------------- > >> ---------- > >> _______________________________________________ > >> Emc-users mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > -- > you can lead a person to knowledge > but you cannot make him think > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _________________________________________________________________ We are your photos. Share us now with Windows Live Photos. http://go.microsoft.com/?linkid=9666047 ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
