Stuart, Did you try coming away from the timer left one segment to draw in the vertical line instead of just jumping straight across? Sometimes CL will refuse one thing but accept it in a different way. (You'll have to add a short horizontal segment too.)
Also, it seems to make a difference how you point the editor at the "layout grid". Try pointing at the intersections, the blanks, and the centers of the horizontal and vertical grid segments; what it wants seems to vary by what item you're inserting. Hope this helps. Kim Stuart Stevenson wrote: > John, > The problem (at this time) is not the knowledge of the needed > change it is the how to do it. I do not know how to get the CL editor > to edit the rung the timer is in. The CL editor picks the other rung > to edit. > thanks > Stuart > > On Mon, Jun 29, 2009 at 5:10 PM, John Thornton<[email protected]> wrote: > >>Stuart, >> >>I missed some of the chat on this but in your image you need to connect C and >>E together >>or the timer will not work. >> >>http://www.linuxcnc.org/docview/html//ladder_classic_ladder.html#r1_7_3 >> >>John >> >>On 29 Jun 2009 at 14:56, Stuart Stevenson wrote: >> >> >>>I just got back and looked at the configs and wiki. I don't use >>>%W's. >>>The link did not help me. >>>I >>> >>>On Mon, Jun 29, 2009 at 11:39 AM, Chris Radek<[email protected]> >>>wrote: >>> >>>>On Mon, Jun 29, 2009 at 10:19:18AM -0500, Stuart Stevenson >>> >>>wrote: >>> >>>>>Gentlemen, >>>>> Ubuntu 6.06 >>>>> EMC2-trunk (git pull this morning) >>>>> Cinci 5axis machine >>>>> the var %I7 shows on >>>>> the section dislay %I7 is not on and the lube timer does not >>> >>>run >>> >>>>> screen shot is here http://imagebin.org/53991 >>>> >>>> >>>>This must be an old ladder you've brought forward from 2.2. >>> >>> The >>> >>>>timer change, and other important things you should know, are on >>> >>>the >>> >>>>UPDATING page. >>>> >>>> >>> >>>http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?UPDATING#Classicladder_c >>>hanges >>> >>>> >>>> >>>-------------------------------------------------------------------- >>>---------- >>> >>>>_______________________________________________ >>>>Emc-users mailing list >>>>[email protected] >>>>https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>>> >>> >>> >>> >>>-- >>>you can lead a person to knowledge >>>but you cannot make him think >>> >>>-------------------------------------------------------------------- >>>---------- >>>_______________________________________________ >>>Emc-users mailing list >>>[email protected] >>>https://lists.sourceforge.net/lists/listinfo/emc-users >> >> >> >>------------------------------------------------------------------------------ >>_______________________________________________ >>Emc-users mailing list >>[email protected] >>https://lists.sourceforge.net/lists/listinfo/emc-users >> >> > > > > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
