You need to "pick" the rung you want to edit and when you "pick" it the side rails turn red then select "Modify" in the little Editor window. Now it turns to bluish squares. Pick the vertical line tool (middle one on the third row of the Editor window and left click between the C and the E and a line will pop in place. Now select Ok in the Editor window...
John On 29 Jun 2009 at 16:17, Stuart Stevenson wrote: > John, > The problem (at this time) is not the knowledge of the needed > change it is the how to do it. I do not know how to get the CL > editor > to edit the rung the timer is in. The CL editor picks the other > rung > to edit. > thanks > Stuart > > On Mon, Jun 29, 2009 at 5:10 PM, John Thornton<[email protected]> > wrote: > > Stuart, > > > > I missed some of the chat on this but in your image you need to > connect C and E together > > or the timer will not work. > > > > > http://www.linuxcnc.org/docview/html//ladder_classic_ladder.html#r1_ > 7_3 > > > > John > > > > On 29 Jun 2009 at 14:56, Stuart Stevenson wrote: > > > >> I just got back and looked at the configs and wiki. I don't use > >> %W's. > >> The link did not help me. > >> I > >> > >> On Mon, Jun 29, 2009 at 11:39 AM, Chris > Radek<[email protected]> > >> wrote: > >> > On Mon, Jun 29, 2009 at 10:19:18AM -0500, Stuart Stevenson > >> wrote: > >> >> Gentlemen, > >> >> Ubuntu 6.06 > >> >> EMC2-trunk (git pull this morning) > >> >> Cinci 5axis machine > >> >> the var %I7 shows on > >> >> the section dislay %I7 is not on and the lube timer does > not > >> run > >> >> screen shot is here http://imagebin.org/53991 > >> > > >> > > >> > This must be an old ladder you've brought forward from 2.2. > >> The > >> > timer change, and other important things you should know, are > on > >> the > >> > UPDATING page. > >> > > >> > > >> > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?UPDATING#Classicladder_c > >> hanges > >> > > >> > > >> > > >> > -------------------------------------------------------------------- > >> ---------- > >> > _______________________________________________ > >> > Emc-users mailing list > >> > [email protected] > >> > https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > >> > > >> > >> > >> > >> -- > >> you can lead a person to knowledge > >> but you cannot make him think > >> > >> > -------------------------------------------------------------------- > >> ---------- > >> _______________________________________________ > >> Emc-users mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > -------------------------------------------------------------------- > ---------- > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > -- > you can lead a person to knowledge > but you cannot make him think > > -------------------------------------------------------------------- > ---------- > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
