> This would be ideal where the area can be kept relatively clean because the > dielectric fluid is circulating, but as I found when I was EDMing a couple > of > broken taps a couple of years back, it falls over when you are in a deep, > blind hole, the kero gets so conductive it eventually shorts out and I had > to > pull the electrode, move the table for access, blow the hole clean with an > air hose, and re-fill my puddle with fresh stuff, about every 20 thou. And > while it did work well and the holes were salvaged, it sure was a 3 day > PIMA. > > for deep holes try pumping the fluid through a hollow electrode
-- dos centavos ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
