Dear all
this might be a newbie question, but I am very new to CNC and EM2, so please excuse :-) My machine is a diy tabletop I have been playing with the EMC2 Live CD based on Ubuntu 6.06 "Dapper Drake" and had some trouble to configure the pins correctly: 1. Homing and limit switches I have all limit switches connected on one pin and would like to use them also for homing. In the config wizard i could not find this option. I have checked the wiki and think my case should be under:http://wiki.linuxcnc.org/emcinfo.pl?Homing_And_Limit_Switch#Home_and_Limit_Switches_on_the_same_input but there is no info... Is there a reason for this option not beeing available? 2. Axis active My controller has one pin to set the axis active, so that the machine is not powered on all the time, which option should i use for that in the config? 3. Boost (High current for motor start) the controller has one pin to supply full current to motors during start, could i implement this somehow, is there a function to set the pin high during accelerations, or during motor start? Thanks for any reply in advance! Nik _________________________________________________________________ http://redirect.gimas.net/?n=M1004xNoSpam2_WW Angst vor Spam? Hotmail schützt Sie mit modernster Technologie! ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
