Yes, SheetCam can do tangential control. The tricky bit will be the mechanical design. You need to make sure the point where the jet contacts the work does not move at all as you rotate it. Can you get a joint that will withstand the pressure and allow rotation?
Les Eric H. Johnson wrote: > Viesturs, > > I was able to do it through Sheetcam (http://www.sheetcam.com/) and slightly > customizing the post for some special conditions required for use with an > ultrasonic knife. I expect Leslie Newell will chime in on this, as it does > require a special post which I do not believe is included in the standard > distribution of sheetcam. > > Regards, > Eric > > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
