Hello... Not bad idea to be separate item as jog under toolchange can be resolved quicker. I changed wiki and I think all command M0 M1 and M6 can behave similar. For example if someone mill plastic then can issue few M1 in program and has optional stop on M1 dissabled. If swarf come up then just enable M1 pause and have nice workaround. Maybe there is not bad idea to have another one pause button that pause program like inserting M1 after just current line?!? Easyer to implement.
Beaware of one nasty thing with manualtoolchange.py! When window popup the keyboard control is on that window! If someone uses Estop in keyboard and something goes wrong during toolchange dialog then Estop button wont work! Slavko Ries van Twisk pravi: > Salvko, > > i think it would be a good idea to seperate item 15 into two items: > > > 15) JOG under PAUSE - Alow users to jog machine when program is paused. > 16) JOG under ToolChange - Alow users to jog machine when program M6 > executed. The TouchOff? should be enabled too and maybe even MDI > > Although they look the same, the problem domain is in both cases > somewhere else. > > As noticed before, item 16) is possible easer to solve then item 15) > because of various internals > > > With 15 it would be just fine if you can jog out, stop the spindle > clean the workpiece, clean the bit and the machine and continue. For > me personally it would already be awesome if when I press pause the > tool will just move up and spindle stop (not need for jogging) > The problem with 15) is that you can pause in the middle if a running > line, and it's hard to re-start in the middle of an operation. > > With 16) The machine stops at a distinct line and already can continue > from there, we just need to have a way to touch off (can that be done > with the modified manual hal toolchange??) > > If they are broken into two piece, it will be easer to solve because a > programmer can just concentrate on a easer task. > > Ries > PS: I am going to modified the hal:manualtoolchange a bit so it will > find the start point of 3 axis routers better, my little project for > EMC :) > > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
