On Fri, 2010-07-23 at 11:45 -0700, Speaker To-Dirt wrote: > Hey All: > > Thanks for the fast replies. Hummm..... I thought of turning off > outputs to the parallel port, but wanted something I could use as a > fast test of individual axes on individual programs. What I did do was > comment out all motion in the XY plane and keep all the Z motion. But > that means another file. Okay, well I guess that's just how I'll have > to do it. > > Thanks!
In case it might be handy. A forward slash "/" could be used at the beginning of the XY lines, then use the optional block button in the GUI. http://www.linuxcnc.org/docview/html//gcode_overview.html#r1_1 http://linuxcnc.org/handbook/gcode/g-code.html#anchor256422 -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
