We peck tap a lot, so I would love to see emc2 do that. On Sep 4, 2010 9:42 PM, "Chris Radek" <ch...@timeguy.com> wrote:
On Sat, Sep 04, 2010 at 09:27:42PM -0500, Stuart Stevenson wrote: > The spindle servo amp is a tr... On my machine I hooked one of the A/B channels also to index. For normal tapping you just make one pass anyway, so orientation isn't important. This just gives "lots" of index pulses, so when you tap it just starts moving right away. A mill is not like a lathe spindle where every thread is multipass and they have to line up. With a proper index you can peck tap, but I have never wanted to do that. Chris ------------------------------------------------------------------------------ This SF.net Dev2Dev ... ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
