Il 10/09/2010 13:23, Andy Pugh ha scritto: > On 10 September 2010 10:39, Spiderdab<77...@tiscali.it> wrote: > > >> didn't follow you much..but maybe i can explain better what i need: >> you can set your accel and deceleration in the ini file, one for each >> motor, but what about if i need to do some movement with a long ramp of >> acceleration and other with a short one? >> > Why do you have this requirement? With a bit more detail we might be > able to find a way to do what you want. > > I've done an inverted tetrapod. Just for artistic purpose. I need to make a Volley-ball fly in 3D, and the emc software, with 4 stepper motors is quite perfect (and economic!!) for this project. but i need this time and others, that accel and decel would change during movements. for example one time the ball (or a fly, or other bullshits..) should accelerate smoothly, sometimes must do a rapid movement.
i wish i could explain the problem. don't know if would be a good implementation also for milling or lathe, maybe no, but it's always an implementation that could give more power to EMC! thanks, davide. ------------------------------------------------------------------------------ Automate Storage Tiering Simply Optimize IT performance and efficiency through flexible, powerful, automated storage tiering capabilities. View this brief to learn how you can reduce costs and improve performance. http://p.sf.net/sfu/dell-sfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
