Very nice reducers! I was thinking of making a pig roaster in summer.
And now I realize that I could make a CNC pig roaster! Lessee... A temp sensor inside then pig and A-D converter Pig rotation RPM variable speed depending on roasting progress... A tank of water and a valve to dump water into the coals when the pig reaches temp and the program is stopped... fun and yummy On Wed, Feb 16, 2011 at 11:43 AM, Kirk Wallace <[email protected]>wrote: > On Wed, 2011-02-16 at 09:44 -0600, Igor Chudov wrote: > ... snip > > < > http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-Mill/34-Adding-Servo-Control-to-Knee/ > >The > > motor is a 3000 RPM, 65V DC motor by Soelma. On it, there is a "MI 40" > 15:1 > > gearbox by SITI. So, if the DC motor runs at 3,000 RPM, the output shaft > > turns at 200 RPM, and the knee would move by something like 40 IPM. > > Perfectly acceptable. > ... snip > > Your right angle drive looks like the drives I saw at Surplus Center: > https://www.surpluscenter.com/item.asp?item=13-1461 > https://www.surpluscenter.com/item.asp?item=13-1464 > https://www.surpluscenter.com/item.asp?item=13-1441 > https://www.surpluscenter.com/item.asp?item=13-1465 > > I thought they would be a good start for a robot arm. The higher ratio > units might not be good for ball screws, but might be perfect for arms > and turntables. There are a ton of other right angle drives available > but these seemed especially useful at a decent price. > > Too little time and money :( > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > > > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
