My turret is a bit simpler but all my config files are here including my clp file.
http://gnipsel.com/shop/hardinge/hardinge.xhtml John Clint Washburn wrote: > I am in the process of setting up classic-ladder for the tool-changer on my > Hitachi-Seiki NH500 Turret lathe. I am using a mesa 5i20 card for inputs and > opto22 relays. For each tool position it uses a combination of inputs from > six switches that follow 6 cams on a drum to dictate position input. The > tool change process consists of: > 1. The carriage extending to unlock with a solenoid. > 2. Tool changer initializing solenoid for hydraulic motor rotating clockwise > to switch combination for tool position > 3. Once in position de-energize solenoid for rotation and return to locked > state (also designated by switches.) > 4. Depending on if it is an ID or OD tool position an auxiliary function > would be then required to extend the ID tool if it is called. > > Does this make sense to anyone? Has anyone used this type of classic-ladder > program for their tool-changer? Does anyone have an .clp program that would > illustrate how to go about this so I can get an idea of how to go about it? > Any help would be greatly appreciated. > > clint > > > > __________ Information from ESET NOD32 Antivirus, version of virus signature > database 6212 (20110615) __________ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com > > > > ------------------------------------------------------------------------------ > EditLive Enterprise is the world's most technically advanced content > authoring tool. Experience the power of Track Changes, Inline Image > Editing and ensure content is compliant with Accessibility Checking. > http://p.sf.net/sfu/ephox-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ EditLive Enterprise is the world's most technically advanced content authoring tool. Experience the power of Track Changes, Inline Image Editing and ensure content is compliant with Accessibility Checking. http://p.sf.net/sfu/ephox-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
