On Sun, 2011-10-02 at 22:53 -0700, Kirk Wallace wrote: ... snip > Taking a wild guess I tried an ioaddr_hi at extended+2 and it loads > fine, shows and retains pin and parameter settings, but no output. ... snip
I tried my Pico UPC on the same SIIG parallel port that I used above for the Pluto. It loads and seems to run okay. I can turn the SSR's on and off, but I get some error messages from AXIS shown here: http://www.wallacecompany.com/machine_shop/EMC2/Screenshot-UNIVPWM-1a.png The univdiags run fine. I guess this means the trouble with the Pluto is in the Pluto driver and not in the parport or generic software? Jon, the Base and the Extended registers on my SIIG happened to be 0x400 apart, does the current driver and diags have a means for finding and using extended registers in non-standard locations? I assume the "mode 4" error indicates an EPP problem, but the SIIG extended control register shows it set for EPP. Although, thinking a little more, I'm not totally sure parport3 is the SIIG, two ports are NetMos, the other is the motherboard port. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2dcopy1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
