On Sunday, December 25, 2011 09:49:11 AM Tomaz T. did opine:

> Hi everyone,
> I installed new pci express card with two parallel ports, and I can't
> get any signal out of it. I am trying to connect it to two c10 boards
> which are working fine with mach. lspci -v feedback is:
> Communication controller: NetMos Technology PCI 9815 Multi-I/O
> Controller (rev 01)Subsystem: LSI Logic / Symbios Logic Device
> 0020Flags: medium devsel, IRQ 19I/O ports at cc00 [size=8]I/O ports at
> c880 [size=8]I/O ports at c800 [size=8]I/O ports at c480 [size=8]I/O
> ports at c400 [size=8]I/O ports at c080 [size=16]Kernel driver in use:
> parport_pcKernel modules: parport_pc
> 
> and  cat /proc/ioports gives me:
> c000-cfff : PCI Bus 0000:03  c000-cfff : PCI Bus 0000:04    c080-c08f :
> 0000:04:00.0    c400-c407 : 0000:04:00.0    c480-c487 : 0000:04:00.0   
>   c480-c482 : parport1    c800-c807 : 0000:04:00.0      c800-c802 :
> parport1    c880-c887 : 0000:04:00.0      c880-c882 : parport0   
> cc00-cc07 : 0000:04:00.0      cc00-cc02 : parport0 So I also ran trough
> addresses and the one without error messages on start-up are c000,
> c800, c400, but still no signal from card. I checked with multimeter,
> signals on pins assigned for steppers direction which I guess it should
> be measurable change when jogging in one or another direction. Tried
> with inverting signals also with no luck. Is there something I missed
> on start, because what I did is just insert card into the free pci-e
> slot? Thank you,Regards!
> 
Look in your config/profile-name/profile-name.hal file, you will need to 
make it resemble this, edit addresses for yours:
loadrt probe_parport
#loadrt hal_parport cfg="0x378 out  "
loadrt hal_parport cfg="0xd000 out  "  <--this line
setp parport.0.reset-time 2000

Plus any options needed by your statement that it is a PCI-E card, my 
system is std PCI.

That is assuming that netmos 9815 card is usable, I _think_ that one is one 
we agreed to blacklist in our discussions here, about 2 years ago.  It 
doesn't do the EPP mode correctly or some such.  I have one, made by 
Rosewill, and I took it back out and am now using a startech (on the box) 
card which signs on according to an "lspci -v" as:

00:0a.0 Parallel controller: Timedia Technology Co Ltd SUN1888 (Dual 
IEEE1284 parallel port) (rev 01) (prog-if 02)
        Subsystem: Timedia Technology Co Ltd Device 0103
        Flags: stepping, medium devsel, IRQ 11
        I/O ports at d000 [size=8]
        I/O ports at d400 [size=8]
        Kernel driver in use: parport_pc
        Kernel modules: parport_pc

Only one port is bonded out, but it works fine, running my toy sized mill.

Merry Christmas!

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
My web page: <http://coyoteden.dyndns-free.com:85/gene>
Ever notice that even the busiest people are never too busy to tell you
just how busy they are?

------------------------------------------------------------------------------
Write once. Port to many.
Get the SDK and tools to simplify cross-platform app development. Create 
new or port existing apps to sell to consumers worldwide. Explore the 
Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join
http://p.sf.net/sfu/intel-appdev
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to