On Sunday, December 25, 2011 11:53:35 AM Tomaz T. did opine: > >> Hi everyone, > >> I installed new pci express card with two parallel ports, and I can't > >> get any signal out of it. I am trying to connect it to two c10 boards > >> which are working fine with mach. lspci -v feedback is: > >> Communication controller: NetMos Technology PCI 9815 Multi-I/O > >> Controller (rev 01)Subsystem: LSI Logic / Symbios Logic Device > >> 0020Flags: medium devsel, IRQ 19I/O ports at cc00 [size=8]I/O ports > >> at c880 [size=8]I/O ports at c800 [size=8]I/O ports at c480 > >> [size=8]I/O ports at c400 [size=8]I/O ports at c080 [size=16]Kernel > >> driver in use: parport_pcKernel modules: parport_pc > >> [...] > > > > Look in your config/profile-name/profile-name.hal file, you will need > > to make it resemble this, edit addresses for yours: > > loadrt probe_parport > > #loadrt hal_parport cfg="0x378 out " > > loadrt hal_parport cfg="0xd000 out " <--this line > > setp parport.0.reset-time 2000 > > > > Plus any options needed by your statement that it is a PCI-E card, my > > system is std PCI. > > > > That is assuming that netmos 9815 card is usable, I _think_ that one > > is one we agreed to blacklist in our discussions here, about 2 years > > ago. It doesn't do the EPP mode correctly or some such. I have one, > > made by Rosewill, and I took it back out and am now using a startech > > (on the box) card which signs on according to an "lspci -v" as: > > > > 00:0a.0 Parallel controller: Timedia Technology Co Ltd SUN1888 (Dual > > IEEE1284 parallel port) (rev 01) (prog-if 02) > > Subsystem: Timedia Technology Co Ltd Device 0103 > > Flags: stepping, medium devsel, IRQ 11 Look at _your_ lspci -v output, and use the address in the next line in your .hal file statement line. > > I/O ports at d000 [size=8] > > I/O ports at d400 [size=8] > > Kernel driver in use: parport_pc > > Kernel modules: parport_pc > > > > Only one port is bonded out, but it works fine, running my toy sized > > mill. > > > > Merry Christmas! > > > > Cheers, Gene > > -- > > .hal file is ok, and I tried with those three addresses but still > nothing comes out. Ok, if this card is not able to output good EPP > signals, can anyone suggest me good hardware to go with? I will use it > for running 5 axis (gantry) milling machine, for now with steppers, and > maybe in the future switch to servos.
Look for something with the SUN1888 chip on it. Call around & check if the adv doesn't say. If you can get one with the B.O.B. for the 2nd port included, that's just gravy on the biscuits IMO. Might be another $10 on this side of the big pond. Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> Some of them want to use you, Some of them want to be used by you, ...Everybody's looking for something. -- Eurythmics ------------------------------------------------------------------------------ Write once. Port to many. Get the SDK and tools to simplify cross-platform app development. Create new or port existing apps to sell to consumers worldwide. Explore the Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join http://p.sf.net/sfu/intel-appdev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users