On Sun, 25 Dec 2011, Tomaz T. wrote: > Date: Sun, 25 Dec 2011 22:19:13 +0000 > From: Tomaz T. <tomaz_...@hotmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Parport > > > >>>> >>>> I was looking for Mesa combination with 5i25 + daughtercard but I need >>>> outputs for 6 steppers because of gantry construction of machine frame. >>>> 7i76 has 5 "dedicated" outputs. Can I use other outputs for motor as well? >> >> The default 5I25 config when used with the 7I76 is a dual 7I76 configuration >> so there are actually 10 step generators available. As Viesturs says, you can >> connect most step motor drives directly to the 5I25 so you can have a >> 5I25/7I76 for 5 stepgens and 48 I/O points and then connect one or more >> additional step drives directly to the second 5I25 connector. If you have a >> small system with 5V limit switches, you can get away without any daughter >> cards at all or perhaps 7I75 I/O breakout/protectors only >> > > > So I guess then I could use existing two C10 breakout boards in combination > with 5i25???
Yes but youu would have to give me the C10 pinout so I could make a C10X2 configuration for the 5I25 > > ------------------------------------------------------------------------------ > Write once. Port to many. > Get the SDK and tools to simplify cross-platform app development. Create > new or port existing apps to sell to consumers worldwide. Explore the > Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join > http://p.sf.net/sfu/intel-appdev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Write once. Port to many. Get the SDK and tools to simplify cross-platform app development. Create new or port existing apps to sell to consumers worldwide. Explore the Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join http://p.sf.net/sfu/intel-appdev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
