On Tue, 14 Feb 2012 21:00:16 -0600 Jon Elson <el...@pico-systems.com> wrote:
> dave wrote: > > GOOD GRIEF!! and I thought 0.003 on X and Y was bad. > > > Well, that was the original 1938 Acme screw and bronze nuts. The > threads in the center of the X screw are thinner to the extent you > can see it from ten feet > away! Now, I have a "backlash" of about .001 - .0015 on all the axes > of my mill. It is not true backlash but spring in the various > mountings of the ballscrews and nuts. > > Jon Ah! That is pretty livable. I'm at something like 2.5 thou on both the Mazak and Cinci. I don't like it but can live with it. Dave > > ------------------------------------------------------------------------------ > Virtualization & Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
