On Tue, 20 Mar 2012, Ray Mitchell wrote: > Date: Tue, 20 Mar 2012 14:04:01 -0700 > From: Ray Mitchell <jrmitche...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] Tool change question > > I always thought that the small tools used for PCB work (the ones with the > colored beads on the shaft) were made so that the back of the bead is a > reference distance to the tip of the tool. Then you could change the tool, > push the bead up against the collett, tighten to a specific torque, and go. > > Ray M.
And I thought they were just so old folks could read the drill/mill size... Peter Wallace Mesa Electronics ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
