Thanks so far. I am using a customized version of 2.6.0, so I don't do updates very quickly.
On Thu, Apr 12, 2012 at 10:52 AM, Stan Sweet <sw...@cfu.net> wrote: > Erik, > > I had similar problems with pncconf using the buildbot 2.5 branch until I > updated LinuxCNC using the > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UpdatingTo2.5 instructions. I do > not know what is different, it just worked. > > Stan > > > On Wed, 12 Apr 2012, Erik Friesen wrote: > > > > Date: Thu, 12 Apr 2012 09:06:30 -0400 > > From: Erik Friesen <e...@aercon.net> > > Subject: Re: [Emc-users] Understanding the 5i25 > > To: "Enhanced Machine Controller (EMC)" > > <emc-users@lists.sourceforge.net> > > Message-ID: > > < > caeuupiupy6r+aet8k-bgmylf5fdc+r1c2n9byu9n8ncp0rc...@mail.gmail.com> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > After getting started, something seems funny. In the pncconf test > window, > something is > > interfering with proper operation of the stepgen. It runs, but when it > decides to stop, I have to > > back out of the window, and try again. When I run linuxcnc (2.6.0) when > I try to move, it says > > joint 0 following error. I am not clear where to head in at here, I > don't see anything to do with > > encoder setup anywhere. > > > > > ------------------------------------------------------------------------------ > For Developers, A Lot Can Happen In A Second. > Boundary is the first to Know...and Tell You. > Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! > http://p.sf.net/sfu/Boundary-d2dvs2 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
