On May 9, 2012, at 3:56 AM, andy pugh wrote: > On 9 May 2012 07:37, Jeshua Lacock <jes...@3dtopo.com> wrote: > >> OK! Now I will start testing it. Anyone have an idea what to look for? In >> other words what would cause LinuxCNC to crash from the USC? > > It isn't crashing, I suspect, so muchas gracefully giving up. > > (segmentation fault is a crash, exiting because it can't find the > board is a graceful exit due to misconfiguration) > > What does your HAL file have on the line which includes "loadrt hal_ppmc" > (From http://www.linuxcnc.org/docview/html/drivers/pico_ppmc.html ) > > You need the port_addr to match the address from lspci.
Hi Andy, Aha! There is no port number specified. I added the port and it loads fine now, thank you! And thanks for the link to that page, it looks like it will prove to be quite useful. Thanks again, Jeshua Lacock Founder/Engineer 3DTOPO Incorporated <http://3DTOPO.com> Phone: 208.462.4171 ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
