Well if these Cedar trail boards work fine with plain VGA at resolutions up to 1024x768, I am fine with that. (That's all I was going to use anyway.) How is the latency on your DN2800? We have already ordered a BOXD2700MUD from Newegg. I'm going on vacation for a week and the new stuff should be here by the time I get back. Once I have had some time to play with it I will let everyone know how it works out.
Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -- P. Graham Dunn Phone: 330-828-2105 E-mail: to...@pgrahamdunn.com 630 Henry St. Dalton, OH 44618 www.pgrahamdunn.com -----Original Message----- From: andy pugh [mailto:bodge...@gmail.com] Sent: Thursday, July 19, 2012 5:54 AM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Computer Boards? On 19 July 2012 07:49, Lester Caine <les...@lsces.co.uk> wrote: > The 'problem' is with the graphics 'chipset' used. My DN2800 works absolutely fine at 1024 x 768 out of the VGA port. I do only get the options of 640x480, 800x600 and 1024x768 but I don't know whether this is because the only thing I have plugged it into is my TV and that may not be very good at decaring capabilities. . (I don't have a houseful of spare monitors, and my main machine is an all-in-one Mac) I think that the DN2800 will be perfectly adequate with the screen sizes typical of CNC controllers. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
