What auction? That is a link to MSC... JT
On 7/1/2013 7:39 AM, Stuart Stevenson wrote: > http://www.mscdirect.com/product/84955046?src=pla&008=-99&007=Search&pcrid=25122952264&006=25122952264&005=53306267824&004=7506871264&002=2167139&mkwid=smTSbiWNy&cid=PLA-Google-PLA+-+Test_smTSbiWNy_PLA__25122952264_c_S&026=nv&025=c > > guys > take a gander at this link > > this "auction" could possibly be a good buy for someone > > > On Mon, Jul 1, 2013 at 7:29 AM, Stuart Stevenson <stus...@gmail.com> wrote: > >> I sent an email asking the terms of this "auction". >> >> >> On Mon, Jul 1, 2013 at 7:22 AM, Stuart Stevenson <stus...@gmail.com>wrote: >> >>> upon further inspection I see the tool change spanner sitting on the >>> table with the knee handle >>> >>> >>> On Mon, Jul 1, 2013 at 5:45 AM, John Thornton <bjt...@gmail.com> wrote: >>> >>>> The Kwik-Switch tooling is held on with a spring loaded nut and the nut >>>> gets tighter the more force you put on the tool. This system works great >>>> and should not be confused with other quick switch systems which I know >>>> nothing about. >>>> >>>> JT >>>> >>>> On 6/30/2013 5:16 PM, Kirk Wallace wrote: >>>>> On 06/30/2013 02:34 PM, Charles Steinkuehler wrote: >>>>>> -----BEGIN PGP SIGNED MESSAGE----- >>>>>> Hash: SHA1 >>>>>> >>>>>> I'd love to buy it, but there is no actual contact info in the >>>>>> craigslist posting, I have received no response to e-mail to the >>>>>> one-off craigslist e-mail address, and all identifying meta-data was >>>>>> stripped from the jpeg photos (so no GPS or anything). :( >>>>>> >>>>>> I'm still somewhat hoping to get an e-mail out of the blue, but at >>>>>> this point I'm not holding my breath. >>>>>> >>>>>> On 6/30/2013 4:24 PM, Dave wrote: >>>>>>> I didn't notice that. I have an Erikson QC 30 on my Bridgeport II >>>>>>> and it is nice. >>>>> Just in case, see Quick-Change (not Quick-Switch) here: >>>>> http://www.tools-n-gizmos.com/specs/Tapers.html >>>>> >>>>> My mill appears to have the same head, but uses NMTB 40 tools with a >>>>> power draw bar. My take on some of the chatter I've seen on forums is >>>>> that when the Quick-xxx nuts get worn, tools are hard to lock and can >>>>> fall out in dramatic fashion. >>>>> >>>>> http://www.ebay.com/itm/290928102085 >>>>> http://www.ebay.com/itm/330945298681 >>>>> >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> This SF.net email is sponsored by Windows: >>>> >>>> Build for Windows Store. >>>> >>>> http://p.sf.net/sfu/windows-dev2dev >>>> _______________________________________________ >>>> Emc-users mailing list >>>> Emc-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>> >>> >>> -- >>> Addressee is the intended audience. >>> If you are not the addressee then my consent is not given for you to read >>> this email furthermore it is my wish you would close this without saving or >>> reading, and cease and desist from saving or opening my private >>> correspondence. >>> Thank you for honoring my wish. >>> >> >> >> -- >> Addressee is the intended audience. >> If you are not the addressee then my consent is not given for you to read >> this email furthermore it is my wish you would close this without saving or >> reading, and cease and desist from saving or opening my private >> correspondence. >> Thank you for honoring my wish. >> > > ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
